Professional
Training Courses:
Malabi Southwest Training Center is a dedicated training center for SmartCAM® CNC programming systems.
Training is done on latest software version only.
To facilitate focused training, we do not mix companies in the courses. All training is based on the specific needs of the company and individual(s) in each course.
Training dates are set for whenever mutually convenient.
We can also facilitate on-site training.
Each student (maximum 4) is assigned a, state of the art, desk top computer during the course.
The training is "hands on". To personalize and "customize" the learning experience, the students are encouraged to submit examples from their own work place in advance. This material will be used for training and problem solving during the course.
The teacher uses a projector monitor to show and demonstrate the software.
All computers are networked and linked to the Internet via a T1 connection.
Hours: 9:00AM to 4:00PM with lunch 12Noon to 1PM.
| Course name | Pre-requisites | Days | Total Fee |
| SmartCAM Production Milling™ | None* | 3 | $1,500.00 |
| SmartCAM Advanced Milling™ | SmartCAM Production Milling™ | 2 | $1,000.00 |
| SmartCAM FreeForm Machining™ | SmartCAM Production Milling™ | 2 | $1,000.00 |
| SmartCAM Production Turning™ | None* | 3 | $1,500.00 |
| SmartCAM Advanced Turning™ | SmartCAM Production Turning™ | 2 | $1,000.00 |
| SmartCAM Advanced Fabrication™ | None* | 4 | $2,000.00 |
| SmartCAM Advanced Wire EDM™ | None* | 4 | $2,000.00 |
* Students must be computer literate and have basic knowledge of CNC machining.
Fees are based one student per company.
For companies sending more than one student the fees for additional students are as follows:
| Second student: |
$400.00 per day |
| Third student: |
$300.00 per day |
| Fourth student: |
$300.00 per day |
Example: For a company sending 4 students to a 3 day course the total fee would be:
| First student: |
$1,500.00 |
| Second student: |
$1,200.00 |
| Third student: |
$900.00 |
| Fourth student: |
$900.00 |
| Total Fee: |
$4,500.00 |
Fees are due in full with booking
Fees are payable to:
Malabi Communication
13236 N. 7th Street
#4-198
Phoenix, AZ 85022
Cancellation refunds:
Cancellation more than two (2) weeks before start of course: Full refund
Cancellation less than or two (2) weeks before start of course: No refund
Course can be re-scheduled based on availability
Cancellation less than or two (2) weeks before start of course: No refund
Course can be re-scheduled based on availability
Fees and conditions shown in this document are valid from January 1, 2006. They are subject to change without notice.
Curricula
| Course name | Curriculum |
| SmartCAM Production Milling™ | SmartCAM related
to CNC programming, personal setup, GUI and navigation Job Operations File: Tools, Steps and Custom Tool Graphics (CTG) Process Modeling: Geometry import and creation, Editing and Sequencing. Introduction to Work Planes. Machining: Roughing, Finishing. Code: Template file, Machine file. Macros and Customizing Tool Kit (CTK). |
| SmartCAM Advanced Milling™ | Process
Modeling: Geometry import and creation, Mesh creation, Work Planes,
Editing and Sequencing. Machining: Tomb stones, Roughing, Finishing. Code: Template file, Machine file. Macros and Customizing Tool Kit (CTK). |
| SmartCAM FreeForm Machining™ | Process
Modeling: Geometry import and creation, Mesh creation, Surface creation,
Work Planes, Editing and Sequencing. Machining: Tomb stones, Roughing, Finishing. Code: Template file, Machine file. Macros and Customizing Tool Kit (CTK). |
| SmartCAM Production Turning™ | SmartCAM related
to CNC programming, personal setup, GUI and navigation Job Operations File: Tools, Steps and Custom Tool Graphics (CTG) Process Modeling: Geometry import and creation, Editing and Sequencing. Introduction to Work Planes. Machining: Roughing, Finishing. Code: Template file, Machine file. Macros and Customizing Tool Kit (CTK). |
| SmartCAM Advanced Turning™ | Process
Modeling: Geometry import and creation, Wrapping, Work Planes, Editing
and Sequencing. Machining: Turning Centers, Bar Feeders, Roughing, Finishing. Code: Template file, Machine file. Macros and Customizing Tool Kit (CTK). |
| SmartCAM Advanced Fabrication™ | SmartCAM related
to CNC programming, personal setup, GUI and navigation Job Operations File: Tools, Steps and Custom Tool Graphics (CTG) Process Modeling: Geometry import and creation, Editing and Sequencing. Work Planes. Nesting. Flat Pattern. Transitions. Machining: Burners, Lasers, Plasmas, Punches, Routers and Water Jets. Code: Template file, Machine file. Macros and Customizing Tool Kit (CTK). |
| SmartCAM Advanced Wire EDM™ | SmartCAM related
to CNC programming, personal setup, GUI and navigation Job Operations File: Tools, Steps and Custom Tool Graphics (CTG) Process Modeling: Geometry import and creation, Editing and Sequencing. Work Planes. Wire EDM Machine Events. Machining: Roughing, Finishing. Code: Template file, Machine file. Macros and Customizing Tool Kit (CTK). |
We will also provide customized training, personal or technical. As with the standard curriculum, every effort will be made in advance, to identify and agree upon needs and expectations.